TL34 Custom Lift
TL34 Tower Lift
Lifts can be designed in accordance to specific customer
requirements. Any type of boom design, drive design and
power source is available. An example of that is the TL34.
The Tower Lift is designed specifically for doing masonry repair in a steel mill exhaust tower. Prior to purchasing the TL34, the mason was suspended in a basket at 100 feet from a crane and lowered down from the top of the exhaust tower.
DownloadTL34 Custom LiftBrochure
SECIFICATIONS |
||
|---|---|---|
| Working Height | 34 ft 2.5 in | 10.43 m |
| Platform Height | 28 ft 2.5 in | 9.87 m |
| Platform Capacity | 3000 lbs | 1361 kg |
| Platform Size | 57 in Diameter | 1.45 m in Diameter |
| Stowed Height | 13英尺6英寸 | 4.14 m |
| Stowed Length | 10 ft 8 in | 3.30 m |
| Overall Width | 7 ft 6 in | 2.29 m |
| Outside Turning Radius | 17 ft 5 in | 5.31 m |
| Inside Turning Radius | 10 ft 11 in | 3.33 m |
| 离地间隙 | 6 in | 15 cm |
| Engine Power | 33.5 hp | |
| Hydraulic Tank Capacity | 45加 | 170 L |
| Fuel Tank Capacity | 35 gal | 132 L |
| Wheel base | 7 ft 6 in | 2.29 m |
| Gross Weight | 15,000 lbs | 6804 kg |
| Travel Speed | 2.3 mph | |
| Gradeability | 25.5% | |
Specifications Subject to Change
